HELICAL IN-LINE GEARMOTORS CMG
The high degree of modularity is a design feature of CMG helical inline gear reducers and gearmotors range. It is possible to set up the version required using flanges or feet. The main features of CMG helical gear reducers range are:
Summary data
- Die-cast aluminum housings and input flanges for sizes 00, 01, 02, 03 and 04
- Cast iron feet and output flanges
- Ground-hardened helical gears
- Permanent synthetic oil long-life lubrication
HELICAL BEVEL GEARMOTORS CMB
The high degree of modularity of CMB helical bevel gear drives allows it to be completely interchangeable with CM worm gear boxes. It is possible to set up the version required using output flanges, output shafts and optional torque arms. CMB helical bevel gear motors consist of AC motor and helical bevel gear drives. These are the main technical features:
Summary data
- Die-cast aluminum housing.
- Ground helical gears.
- Permanent synthetic oil long-life lubrication
Wormgearmotors CM
Worm gear boxes from the CM series and AC electric motors are used to make these gear motors. The CM is one of Transtecno’s most widespread gear boxes and is available in 10 sizes, from CM026 to CM130, made extremely versatile using different input and output kits for worm gear boxes.
The technical characteristics are shown below, and it is also possible to download the catalog of worm gear boxes and to consult the 2D -3D models from this range.
The form to ask for information can be completed in just a few seconds and is found at the bottom of the page.
Summary data
- Die-cast aluminum housing on sizes 026, 030, 040, 050, 063, 070, 075, 090 and 110. Cast iron housing on size 130
- Double taper roller bearing on sizes 090, 110 and 130
- Die-cast aluminum housing on pre-stage units
Wormgearmotors CMP
The Pre-stage worm gear boxes from the CMP series consist of a worm speed reducer and an AC motor, with pre-stage between them with a unique gear ratio of i=3. Some characteristics of the pre-stage include ground gears with low noise level, compact design, and lifelong lubrication. The pre-stage has a single output bearing and therefore, it can only be used between the motor and the speed reducer.
Summary data
- Die-cast aluminum housing on sizes 026, 030, 040, 050, 063, 070, 075, 090 and 110. Cast iron housing on size 130
- Double taper roller bearing on sizes 090, 110 and 130
- Die-cast aluminum housing on pre-stage units
Double reduction wormgearmotors CMM
The Double Reduction Worm speed reducers from the CMM series combine two worm speed reducers and an AC motor, for worm gear motors with a high torque level. The technical characteristics of this gear motor unit.
Summary data
- Die-cast aluminum housing on sizes 026, 030, 040, 050, 063, 070, 075, 090 and 110. Cast iron housing on size 130;
- Double taper roller bearing on sizes 090, 110 and 130;
- Permanent synthetic oil long-life lubrication.
Single stage helical gearmotors PU
The single-stage helical gears from the PU series are an integral part of the ALU AC gear units series. The carcase and flanges are in aluminium, the design is compact, and the construction layout makes it possible to use the PU gear box on its own or with other gear boxes. Some of the features of the PU single-stage helical gear:
Summary data
- Die-cast aluminum housings, input and output flanges
- Ground-hardened helical gears
- Permanent synthetic oil long-life lubrication
PU pre-stage wormgearmotors CMPU
Pre-stage worm gear reducers from the CMPU series are made using a worm gear reducer from the CM series, and a PU single-stage gearbox. The PU and the CM worm gear reducer mesh perfectly together. Here are the technical features of this drive unit.
Summary data
- Die cast aluminium housing
- Double taper roller bearing on sizes 090 and 110
- Permanent synthetic oil long life lubrication